Noon reports or measured data: what changes for your MRV report
A noon report tells you where the ship was at 12:00 and how much fuel was left. EU MRV asks a different question: what did this ship burn on this voyage, from berth to berth? Most problems in an emissions report start in the gap between those two.
What EU MRV asks for
Under Regulation (EU) 2015/757 a shipping company monitors each ship per voyage and per year. For every voyage to or from an EU port you record the ports with the date and hour of departure and arrival, the fuel consumed per fuel type, the distance travelled, the time at sea and the cargo carried. For a general cargo ship, cargo carried means deadweight carried. Emissions at berth in EU ports are reported separately.
The regulation does not prescribe how you collect these figures. Your monitoring plan does. It names one or more of four methods: bunker delivery notes with periodic tank readings (A), tank monitoring on board (B), flowmeters (C) or direct emissions measurement (D).
Where the noon report falls short
A noon report can feed methods A and B, and many monitoring plans are built on it. There is nothing wrong with that. Three things make it hard work.
A voyage does not start at noon. The ship leaves the berth at 07:40 and arrives at 16:15 two days later. The fuel between the last noon report and arrival has to be recorded separately or worked out afterwards.
Every figure is typed twice. Once on the bridge, once in the office spreadsheet. A slipped decimal turns 12.4 tonnes into 124.
The check comes late. The figures are put side by side when the annual report is compiled, weeks or months after the voyage. By then the crew has changed. The verifier's questions arrive just before the deadline: the verified emissions report is due by 31 March.
What changes when data is checked on entry
The first step needs no hardware. With GM Essential, GPS tracking follows the voyage and the crew enters fuel and cargo figures in a smart template. Every entry is checked the moment it is entered, so a typo is caught on board, by the person who knows the right figure.
The second step is measuring. GM Advanced adds a flowmeter on the main engine. GM Premium puts flowmeters on all emission sources. Fuel is then recorded continuously, so consumption at departure and arrival is measured instead of worked out from two noon figures. Moving to flowmeters changes your monitoring plan. We prepare that change and submit it to your verifier.
Noon reports and a spreadsheet | Checked on entry, measured where you choose | |
Position | One a day | GPS track of the whole voyage |
Fuel per voyage | Worked out from daily figures | Entered in validated templates, or measured by flowmeter |
Errors | Found when the report is compiled | Found on board, at entry |
Verifier | Questions just before the deadline | Data already checked per voyage |
What stays the same
You still need a monitoring plan, a verified report and an upload to THETIS-MRV. We handle those in every package, with one contact person from monitoring plan to verified report.
Book a 20-minute call and we'll look at your current MRV process together.
Sources: Regulation (EU) 2015/757 (EU MRV), Articles 6, 9 and 10 and Annex I (monitoring methods); Commission Implementing Regulation (EU) 2016/1928 (cargo carried). Status: in force. General cargo ships of 400–5,000 GT and offshore ships from 400 GT have been in scope since 1 January 2025.



